HOME

PINE OIL

SYNONYMS:

Pine needle oil

 

 

 

 

 

 

CAS NO.:

8002-09-3

 

EINECS NO.:

N/A

 

FORMULA:

N/A

 

H.S. CODE:

38052000

 

CLASS NO.:

3.2

 

UN NO.:

1272

 

NFPA:

0-2-0

 

DESCRIPTION:

Yellow or brown liquid with characteristic odor, slight less than the gravity of water

 

APPLICATION

Pine oil is a kind of terpine which is compound from turpentine is the chemical processing of neutral reaction. It can be used as daily lift wash agent, disinfectant, high quality ink, painting solvent and mineral floatation agent.

SPECIFICATION & PACKING

Technology Index(Company standard Q/YSL-1-2004)
Items Pine Oil 50% Pine Oil 65% Pine Oil 70% Pine Oil 85% Pine oil 90%
Appearance light yellow or brown-yellowish oil
Total Alcohol Content≥ 50 65 70 85 90

Packing: In galvanized iron drums of 150kgs net each or in iso tank container.
Storage: Store in a cool, dry, well-ventilated place and keep away from heat, sparks and flame.

RAW MATERIAL:

Turpentine as raw materials is carried out by hydration

END GOODS:

wash agent, disinfectant, high quality ink, painting solvent and mineral floatation agent.

REMARKS:

N/A

MATERIAL SAFE DATA SHEETS

MATERIAL SAFETY DATA SHEET

SECTION I - GENERAL

Chemical Name & Synonym :Not applicable

Trade Name & Synonyms :PINE OIL

Chemical Family: Aqueous solution

Formula: Trade secret

SECTION II -HAZARDOUS INGREDIENTS

2-Propanol    CAS No. :67-63-0

Poly(ethylene glycol)4-nonylphenyl ether    CAS No. :127087-87-0

Yarmor    CAS No. :8002-09-3

SECTION III - PHYSICAL AND CHEMICAL DATA

Boiling Point ( C): Not determined o

Vapor Pressure (MM Hg @ 20 C): Not applicable o

Vapor Density (Air = 1) :Not determined

Specific Gravity (H O = 1) :0.990 2

% Volatile by Volume: 7%

Evaporation Rate (H O = 1) :Not determined

Solubility in Water :Miscible

Appearance and Odor :Light yellow, clear fluid with pine odor.

Others None

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Flammable Limits (%)

- LEL          Not determined

- UEL          Not determined

Flash Point (Method Used) :40.3 C (TCC) o

Extinguishing Media: Use any appropriate for surrounding fire.

Special Fire Fighting Procedures: None.

Unusual Fire & Explosion Hazards :None.

SECTION V - HEALTH HAZARD DATA

Route of Entry :Skin absorption, eye contact, ingestion

Carcinogenic Assessment :Not listed

Threshold Limit Value: Not evaluated

Effects of Overexposure :Eye irritant. Effects on skin are dryness and possible irritation.

Emergency & First Aid Procedures :

Eye contact: Flush with water for 15 minutes. If irritation persists, get medical attention.

Skin contact: Wash with soap and water.

Ingestion: DO NOT INDUCE VOMITING. Drink 3 to 4 glasses of water. Get medical attention.

SECTION VI - REACTIVITY DATA

Stability: Stable

Incompatibility (Materials to Avoid) :Acids; any materials not compatible with water

Hazardous Decomposition Products :None known

Hazardous Polymerization :Will not occur

SECTION VII - SPILL OR LEAK PROCEDURE

Steps To Be Taken In Case Material Is Released Or Spilled: Contain spill. Soak up in inert absorbent material. Place in properly labeled leak-proof containers for disposal.

Waste Disposal Method :

Dispose of in accordance with all local, state and federal regulations. Rinse container well before discarding in an authorized landfill.

SECTION VIII - SPECIAL PROTECTION INFORMATION

Respiratory Protection :Not normally needed.

Ventilation :Normal ventilation is adequate.

Protective Gloves:Latex

Eye Protection :Safety glasses or goggles are recommended

Other Protective Equipment: Not normally needed.

SECTION IX - SPECIAL PRECAUTIONS

Precautions To Be Taken In Handling And Storing :

Store in original containers for up to 1 year. Keep closed when not in use.

Other Precautions :

Keep out of reach of children. Read and follow label directions.

CERTIFICATION OF ANALYSIS

pine oil 85%min

Expiry life: one year

COLOR: LIGHT-YELLOW TO DARK LEMON-YELLOW  LIQUID           CONFIRM

CONTENT: 85%MIN                  85.35

MELTING POINT (190-225?) :95%MIN (V/V)        96

DENSITY(20/20?) :0.9200 min            0.922

moisture: 1%max              0.1%